Teléfono :+86-18059296519

Correo electrónico : [email protected]

Español Español

¿QUÉ ESTÁS BUSCANDO?

Tubería de acero inoxidable 304 Tubo de tapa de extremo soldado a tope Venta al por mayor Reborde del tubo Varillas de metal redondas calificadas

Productos

Hogar Productos Accesorios de tuberia Reductor

Concentric Reducer

The Concentric Reducer is available in 304 stainless steel alloys. Tangents are provided on both sides to facilitate welding. Buttweld ends to accommodate the joining of two separate tube lines of different sizes. Stainless steel material is resistant to corrosion and can withstand high temperatures. This product is manufactured in accordance with 3A standards for process line applications including food & beverage industries.

Tamaño :
Seamless Type: 1/2"-20”(DN15-DN500) Welded Type: 1/2”-48”(DN15-DN1200)
Estándar :
GB/T12459, GB/T13401, SH3408, SH3409; ASMEANSI B16.9, B16.28, ASTMA403, MSS SP-43; DIN 2605, DIN2609, DIN2615, DIN2616; JIS B2311, JIS B2312, JIS B2313
Material :
Nickel Alloy, Duplex Steel, Stainless Steel

Pregunte ahora

CATEGORÍAS DE PRODUCTO

como podemos ayudarte

Teléfono : +86-18059296519

Whatsapp : +8618059296519

Correo electrónico : [email protected]

CONTÁCTENOS

nuevos productos

Tapa final SUS304 de alta calidad-EC1
LEER MÁS

Detalles de producto

Concentric Reducer

Feature

The pipe reducer is one of the pipe fittings, which is used for connecting two pipes with varying diameters. A pipe reducer is used to change rate of fluids the flow through. Reducers are usually made by reducing pressing processes, or by expanding pressing processes or by both reducing and expanding pressing processes together, and we can also adopt stamping processes for reducers with some specifications. Reducers are categorized into types, Eccentric and Concentric Reducer. The pipe reducers are widely available in a various materials as per the demands of its applications and industries and also available in different dimensions too.

Pipe reducer help to connect large diameter pipe with small diameter pipe.
Noise and vibration are reduced by using these type of reducers.
These reducers need a limited amount of setup space.
The eccentric reducer absorbs sounds generated by the pipe wall as well as fluid tolerated.
This reducers have the lowest amount of turbulence entrapment.

A reducer allows for a change in pipe size to meet flow requirements or to adapt to existing piping. The length of the reduction is usually equal to the average of the larger and smaller pipe diameters. Reducers are typically concentric, but eccentric reducers can be used to maintain the same top-of-pipe or bottom-of-pipe level.

Standard：	GB/T12459, GB/T13401, SH3408, SH3409; ASMEANSI B16.9, B16.28, ASTMA403, MSS SP-43; DIN 2605, DIN2609, DIN2615, DIN2616; JIS B2311, JIS B2312, JIS B2313
Certification：	SGS，ISO，ROHS
Size：	Seamless Type: 1/2"-20”(DN15-DN500) Welded Type: 1/2”-48”(DN15-DN1200)
Wall thickness：	Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
Radius：	LR/long radius/R=1.5D,SR/Shrot radius/R=1D, various radius: 3D,4D,5D,6D,7D,10D,20D etc.
End：	Bevel end/BE/buttweld
Camber：	30º 40º 60º 90º 180º,etc
Polish：	mirror polish,dull/matte polish,sub-light,240 girt,400 grit
Surface：	Pickled,sand blasting, rolling blast,brighten,matt polished,mirror polished,vanished,shinning
Process Method：	Forged / Casting
Price terms：	FOB,CFR,CIF,EXW all acceptable
Grade：	201，304,304L，309，309S，310S，316,316L，316Ti，317L，321,347H，409,409L，410，410S，420（420J1，420J2），430，436，439，441，444，446 ，2205，2207，etc
Grade：	1.4301, 1.4307, 1.4541, 1.4401, 1.4404 ,1.4571, 1.4438, 1.4539, 1.4547, 1.4529, 1.4562, 1.4410, 1.4878, 1.4845, 1.4828, 1.4876,2.4858, 2.4819，etc

Technical parameters

Norminal Pipe size DN	Outside Diameter at Bevel				End to End L
	D1		D2
	Series A	Series B	Series A	Series B
20×15	26.9	25	21.3	18	38
25×20	33.7	32	26.9	25	51
25×15	33.7	32	21.3	18	51
32×25	42.4	38	33.7	32	51
32×20	42.4	38	26.9	25	51
32×15	42.4	38	21.3	18	51
40×32	48.3	45	42.4	38	64
40×25	48.3	45	33.7	32	64
40×20	48.3	45	26.9	25	64
40×15	48.3	45	21.3	18	64
50×40	60.3	57	48.3	45	76
50×32	60.3	57	42.4	38	76
50×25	60.3	57	33.7	32	76
50×20	60.3	57	26.9	25	76
65×50	76.1(73)	76	60.3	57	89
65×40	76.1(73)	76	48.3	45	89
65×32	76.1(73)	76	42.4	38	89
65×25	76.1(73)	76	33.7	32	89
80×65	88.9	89	76.1(73)	76	89
80×50	88.9	89	60.3	57	89
80×40	88.9	89	48.3	45	89
80×32	88.9	89	42.4	38	89
90×80	101.6	-	88.9	-	102
90×65	101.6	-	76.1(73)	-	102
90×50	101.6	-	60.3	-	102
90×40	101.6	-	48.3	-	102
90×32	101.6	-	42.4	-	102
100×90	114.3	-	101.6	-	102
100×80	114.3	108	88.9	89	102
100×65	114.3	108	76.1(73)	76	102
100×50	114.3	108	60.3	57	102
100×40	114.3	108	48.3	45	102
125×100	139.7	133	114.3	108	127
125×90	139.7	-	101.6	-	127
125×80	139.7	133	88.9	89	127

ETIQUETAS CALIENTES : Concentric Reducer stainless Steel Pipe Fitting weld Connection Reducer Butt Weld Fittings

dejar un mensaje

Si está interesado en nuestros productos y desea conocer más detalles, deje un mensaje aquí, le responderemos tan pronto como podamos.

Productos relacionados

Reductor concéntrico de acero inoxidable 304-EC3

El reductor concéntrico está disponible en aleaciones de acero inoxidable 304. Se proporcionan tangentes en ambos lados para facilitar la soldadura. Extremos soldados a tope para acomodar la unión de dos líneas de tubos separadas de diferentes tamaños. El material de acero inoxidable es resistente a la corrosión y puede soportar altas temperaturas. Este producto se fabrica de acuerdo con los estándares 3A para aplicaciones de líneas de proceso, incluidas las industrias de alimentos y bebidas.

Reductor concéntrico de acero inoxidable 304-EC2

Reductor concéntrico de acero inoxidable 304-EC1

Concentric Reducer

Eccentric Reduce

The Eccentric Reducer is available in 304 stainless steel alloys. Tangents are provided on both sides to facilitate welding. Buttweld ends to accommodate the joining of two separate tube lines of different sizes. Stainless steel material is resistant to corrosion and can withstand high temperatures. This product is manufactured in accordance with 3A standards for process line applications including food & beverage industries.