Industrial gate valves stand as one of the most fundamental and reliable components in vast piping networks, from power plants and chemical refineries to water treatment facilities and offshore platforms. Often called the "workhorses" of flow control, their primary, robust function is simple: to fully open or fully shut the flow of a medium with minimal pressure loss.
This guide provides a comprehensive look at industrial gate valves, covering their design, operation, types, applications, and key selection criteria.
A gate valve is a linear motion valve that employs a flat, vertical "gate" (a disc or wedge) which is raised or lowered into the path of the flow. When the handwheel is turned counter-clockwise, the gate lifts completely out of the flow path, allowing for full, unobstructed flow with very low fluid resistance. When turned clockwise, the gate descends to seal against two parallel seat faces, providing a tight shut-off.
Understanding the key parts is essential for specification and maintenance:
| Component | Function |
|---|---|
| Body & Bonnet | The main pressure-containing cavity and its cover. Common materials include cast carbon steel, stainless steel, and alloy steels. |
| Gate (Disc/Wedge) | The blocking element. It can be solid, flexible, or split-wedge designs to ensure proper sealing under varying conditions. |
| Stem | The rod that transmits motion from the handwheel or actuator to the gate. It can be rising stem (visible, indicating valve position) or non-rising stem. |
| Seat Rings | The precision-machined surfaces against which the gate seals to stop the flow. Often made of hardened materials or welded with stellite for wear resistance. |
| Packing | A seal (e.g., graphite) around the stem contained in the stuffing box to prevent leakage to the environment. |
The operation is straightforward: rotating the handwheel engages threads on the stem and bonnet, converting rotational force into the linear, vertical movement of the gate.
Choosing the right type depends on application requirements:
Wedge Gate Valves
Solid Wedge: The most common, robust type. Suitable for most fluids, including turbulent flow. Less prone to thermal binding but may not compensate for seat misalignment.
Flexible Wedge: A single-piece wedge with a cut around its perimeter. Allows slight flex to improve sealing and compensate for minor body/seat distortion due to temperature or pipeline stress.
Split Wedge (Parallel Disc): ETIQUETAS CALIENTES : industrial gate valve Válvula de compuerta types of gate valves how does a gate valve work gate valve vs ball valve rising stem gate valve
No.1633, Binhai Road, Wenzhou Economic Development Zone, Wenzhou, China
Soporta red IPv6
